Central Vacuum Installation in Port Jefferson Station, NY

Central Vacuum Systems Designed Around Your Home and Installed by an Experienced Team

Custom Vacuum Systems designs and installs central vacuum systems for homes in Port Jefferson Station. Every project starts with a layout drawn up for the specific house, covering inlet locations, tubing routes, and a power unit sized to the system. Our team then handles the installation and testing. We work on new construction, renovations, and retrofits in finished homes.

Request an Installation Consultation

A Simpler Way to Clean Every Room

A central vacuum puts the motor and collection canister in one fixed spot, usually a garage, basement, or utility room. Tubing hidden in the walls, floors, or ceilings links that power unit to inlets around the house. To clean, you plug a lightweight hose into the nearest inlet. The debris is pulled through the tubing to the canister, so there’s no heavy machine to haul from room to room.

Custom Vacuum Systems has more than 50 years of experience designing and installing central vacuum systems across Long Island. We work directly with homeowners and coordinate with builders and contractors on construction and remodeling projects.

Permits and Project Coordination

Port Jefferson Station is an unincorporated hamlet in the Town of Brookhaven. It’s separate from the incorporated Village of Port Jefferson, so construction and renovation permits here generally go through the town rather than a village. If your central vacuum is part of a build or remodel, we’ll coordinate with your builder or contractor to install the tubing and inlets while the framing is still open.

Installation Options

New Construction

The easiest time to add a central vacuum is while the house is being built. With the framing open, tubing can run along short, direct paths, inlets can go exactly where they’ll get the most use, and the power unit can be planned alongside the home’s other mechanical systems. We schedule the rough-in with your builder so it’s finished before insulation and drywall go up.

Existing Homes

Many finished homes can be retrofitted with a central vacuum. We find tubing routes through basements, attics, closets, and wall cavities that reach your main living areas without opening more finished surfaces than necessary. After evaluating the house, we recommend a layout that fits how it was built.

Renovations and Additions

A remodel or addition often leaves framing exposed, which makes it easier to run tubing and place inlets. Contact us before the drywall goes up so the system can be designed around your new floor plan.

Planning the Layout

We plan each system around how you’ll use it every day:

• Inlet count: based on the floor plan, number of levels, and hose length
• Inlet placement: central spots, such as hallways, where one inlet can reach several rooms
• Coverage on every level: stairs, upper floors, and finished basements included
• Tubing routes: short, direct runs that help maintain suction
• Power unit location: accessible, with power available and room to empty the canister

Equipment We Install

Central Vacuum Systems

Complete whole-home systems configured for the property.

Power Units

The motor and collection unit that runs the system. We choose it based on the home’s square footage, the total tubing length, and the number of inlets.

Hide-A-Hose Retractable Systems

A hose stored inside the tubing. You pull it out from the inlet when you need it, and it retracts back into the wall when you’re done, so there’s nothing to carry around or put away.

Inlet Valves

Wall inlets installed at the locations set during planning.

Tubing and Piping

The concealed network that connects each inlet to the power unit.

Accessories and Cleaning Tools

Hoses, floor tools, attachments, and the other components that complete the system.

Our Installation Process

1. Consultation We talk about your home, how you clean, and which features you want, including whether Hide-A-Hose is a good fit.

2. Evaluation and Design We assess the structure, map out tubing routes, and set the inlet and power unit locations. You’ll review the plan before any work starts.

3. Installation Our team installs the tubing, inlets, and power unit according to the design.

4. Testing and Walkthrough We test every inlet to make sure the system works properly. Then we show you how to use the hose, attachments, and power unit, including how to empty the canister.

Benefits of a Central Vacuum

• Less to carry: only a lightweight hose moves with you
• Debris goes elsewhere: dirt travels through the tubing to a collection unit outside your living space
• Quieter in the room: with the motor installed away from living areas, it’s generally quieter than many portable vacuums
• Reach across the house: inlets are placed to cover multiple rooms and floors
• Works for different projects: installation can be planned for new builds, renovations, or existing homes
• Hide-A-Hose: the retractable hose means no hose storage

Why Choose Custom Vacuum Systems

We’ve been installing central vacuum systems throughout Long Island for more than 50 years, and we plan every system around the individual house rather than a standard template.

Our installation services include:

• New construction
• Existing homes
• Renovations and additions
• Central vacuum retrofits
• Hide-A-Hose systems
• System upgrades

We work with homeowners, builders, and contractors to choose the right equipment and plan an installation that suits the property.

Frequently Asked Questions

Can a central vacuum be installed in my existing Port Jefferson Station home? In most cases, yes. We evaluate the house, find practical tubing routes, and recommend inlet and power unit locations that limit disruption to finished areas.

Is Port Jefferson Station part of the Village of Port Jefferson? No. Port Jefferson Station is a separate, unincorporated hamlet, so permitted construction and renovation projects there generally follow Town of Brookhaven requirements.

Where is the power unit typically installed? Usually in a garage, basement, or utility room. The spot should be easy to reach, have power available, and leave room to empty the canister.

How does Hide-A-Hose work? The hose is stored inside the tubing. You pull it out from the inlet when you need it, and it retracts back into the wall afterward.

How many inlets will my home need? That depends on the home’s size, layout, number of levels, and hose length. We work out the number of inlets during planning.

How is the power unit chosen? We look at the size of the home, the total tubing length, and the number of inlets, then recommend a unit that fits the system.