Central Vacuum Installation in
Islip, NY

Central Vacuum Systems Designed for Your Home and Installed by an Experienced Team

Custom Vacuum Systems designs and installs central vacuum systems for homes in Islip. Each project starts with a layout planned around the house, covering inlet locations, tubing routes, and a power unit sized for the system. Then our team handles the installation and testing. We work on new construction, renovations, and retrofits in finished homes.

Request an Installation Consultation

The Convenience of a Central Vacuum

A central vacuum keeps the heavy equipment in one place while you clean the whole house. The power unit, which contains the motor and collection canister, is installed in a garage, basement, or utility room. Tubing concealed in the walls, floors, or ceilings connects it to inlets around the home. You plug a lightweight hose into an inlet, and the debris travels through the tubing to the canister, away from your living space.

Custom Vacuum Systems has more than 50 years of experience designing and installing central vacuum systems throughout Long Island. We work with homeowners directly and coordinate with builders and contractors on larger projects.

Planning Notes for Islip Homes

Islip is the name of both an unincorporated hamlet and the larger town that contains it. Because the hamlet isn’t an incorporated village, permits for construction and renovation projects are generally handled by the Town of Islip. If your central vacuum is part of a build or remodel, we’ll coordinate with your builder or contractor so the tubing and inlets go in at the right stage.

If your property is in a FEMA-designated flood zone, we’ll take that into account when choosing the power unit location and keep the equipment above likely flood levels where the property’s requirements call for it.

Installation Options

New Construction

A central vacuum is easiest to install while a home is being built. With open framing, tubing can follow direct routes, inlets can be placed exactly where they’ll be most useful, and the power unit location can be planned with the home’s other systems. We coordinate the rough-in with your builder so it’s finished before insulation and drywall.

Existing Homes

Many finished homes can be retrofitted with a central vacuum. We look for tubing routes through basements, attics, closets, and wall cavities that reach your main living areas with minimal disruption to finished surfaces. After evaluating the house, we recommend a layout that fits its construction.

Renovations and Additions

If you’re renovating or adding space, open walls make it easier to run tubing and place inlets. Contact us before the drywall goes up so the system can be designed around your updated floor plan.

Designing Your System

We plan every layout so the system is easy to use:

• Inlet count: based on the floor plan, number of levels, and hose length
• Inlet placement: central spots, such as hallways, that let one inlet reach several rooms
• Coverage on every level: stairs, upper floors, and finished basements included
• Tubing routes: short, direct runs that help maintain suction
• Power unit location: accessible, with power available, room to empty the canister, and appropriate height on flood-prone properties

Equipment We Install

Central Vacuum Systems

Complete whole-home systems configured for the property.

Power Units

The motor and collection unit that runs the system. We choose it based on the home’s square footage, total tubing length, and number of inlets.

Hide-A-Hose Systems

A retractable hose stored inside the tubing. It pulls out from the inlet when you need it and retracts into the wall afterward, so there’s no hose to carry or store.

Inlet Valves

Wall inlets installed at the locations set during planning.

Tubing and Piping

The concealed network connecting each inlet to the power unit.

Accessories and Cleaning Tools

Hoses, floor tools, attachments, and other components to complete the system.

How the Installation Works

1. Consultation We discuss your home, how you clean, and the features you’re interested in, including Hide-A-Hose.

2. Evaluation and Planning We assess the structure, map tubing routes, and set the inlet and power unit locations. You’ll see the plan before work begins.

3. Installation Our team installs the tubing, inlets, and power unit according to the plan.

4. Testing and Walkthrough We test every inlet to confirm proper operation. Then we show you how to use the hose, attachments, and power unit, including how to empty the canister.

Benefits of a Central Vacuum System

• Lighter cleaning: you carry only a lightweight hose
• Debris goes elsewhere: dirt travels through the tubing to a remote collection unit
• Quieter in the room: with the motor installed away from living areas, it’s generally quieter than many portable vacuums
• Coverage across the house: inlets are placed to reach multiple rooms and floors
• Fits different projects: installation can be planned for new builds, renovations, or existing homes
• Hide-A-Hose: the retractable hose stays stored in the wall

Why Choose Custom Vacuum Systems

For more than 50 years, we’ve designed and installed central vacuum systems across Long Island. Every system is planned around the individual home and how it’s used.

Our installation services include:

• New construction
• Existing homes
• Renovations and additions
• Central vacuum retrofits
• Hide-A-Hose systems
• System upgrades

We work with homeowners, builders, and contractors to choose the right equipment and plan an installation suited to the property.

Frequently Asked Questions

Can a central vacuum be installed in my existing Islip home? In most cases, yes. We evaluate the house, identify practical tubing routes, and recommend inlet and power unit locations that limit disruption to finished areas.

What if my property is in a flood zone? We’ll consider power unit locations that keep the equipment above likely flood levels, in line with the requirements that apply to your property.

Where is the power unit typically installed? Usually in a garage, basement, or utility room. The location should be accessible, have power available, and leave room to empty the canister.

What is Hide-A-Hose? It’s a retractable hose that’s stored inside the tubing, pulled out from the inlet for cleaning, and retracted afterward.

How many inlets will my home need? That depends on the home’s size, layout, number of levels, and hose length. We determine the number of inlets during planning.

How do you choose the power unit? We consider the size of the home, the total tubing length, and the number of inlets, then recommend an appropriate unit.