Central Vacuum Installation in Commack, NY

Central Vacuum Systems Built Around Your Home’s Layout, From Planning to Final Testing

Custom Vacuum Systems designs and installs central vacuum systems for homes in Commack. Before installation begins, we plan where the inlets will go, how the tubing will run, and which power unit suits the house. Then our team completes the work. We handle installations in new construction, during renovations, and as retrofits in finished homes.

Request an Installation Consultation

What a Central Vacuum Does for Your Home

A central vacuum turns vacuuming into a lighter, simpler task. The power unit, which contains the motor and collection canister, is installed in a garage, basement, or utility room. Tubing concealed in the walls, floors, or ceilings links it to inlets located around the house. You connect a lightweight hose to an inlet, and the debris is drawn through the tubing to the canister, away from the room you’re cleaning.

Custom Vacuum Systems has more than 50 years of experience installing central vacuum systems throughout Long Island. We work directly with homeowners and alongside builders and contractors on construction and remodeling projects.

A Note on Permits for Commack Projects

Commack is an unincorporated hamlet that straddles two towns: Huntington and Smithtown. If your central vacuum is part of a new build or renovation, permits for that project generally go through whichever town your property is located in. We coordinate with your builder or contractor so the tubing and inlets are installed at the right point in the project.

Installation Options for Every Project

New Construction

New construction is the most straightforward time to install a central vacuum. With the framing open, we can route tubing efficiently, place inlets exactly where they’ll be most useful, and choose the power unit location alongside the home’s other systems. We schedule the rough-in with your builder so it’s finished before insulation and drywall.

Existing Homes and Retrofits

A home that’s already finished can usually be fitted with a central vacuum. We look for tubing routes through basements, attics, closets, and interior wall cavities that reach the main living areas while keeping disruption to finished surfaces to a minimum. After evaluating the house, we recommend a layout that works with its structure.

Renovations and Additions

If you’re remodeling a kitchen, finishing a basement, or adding living space, exposed framing makes installation easier. It’s a good opportunity to run tubing and place inlets around the new floor plan. Contact us before the walls are closed so the system can be built into the project.

Planning the Layout

A well-planned layout makes the system easy to use every day. We work out:

• How many inlets you need: based on the floor plan, number of levels, and hose length
• Where the inlets go: central spots, such as hallways, where one inlet can serve several rooms
• Coverage for every level: stairways, upper floors, and finished basements included
• Tubing paths: short, direct runs that help maintain suction
• Power unit placement: an accessible location with power available and room to empty the canister

Equipment We Install

Central Vacuum Systems

Complete whole-home systems configured for the house.

Power Units

The motor and collection unit that powers the system. We choose it based on the home’s square footage, the total tubing length, and the number of inlets.

Hide-A-Hose Systems

A retractable hose stored inside the tubing. You pull it out from the inlet when you need it, and it retracts into the wall when you’re done, so there’s no hose to carry or store.

Inlet Valves

Wall inlets installed at the locations set during planning.

Tubing and Piping

The concealed network connecting each inlet to the power unit.

Accessories and Cleaning Tools

Hoses, floor tools, attachments, and other components to complete the system.

How the Installation Works

1. Consultation We discuss your home, how you clean, and the features you’re considering, including Hide-A-Hose.

2. Evaluation and Design We review the structure, plan tubing routes, and set the inlet and power unit locations. You’ll see the plan before work begins.

3. Installation Our team installs the tubing, inlets, and power unit according to the design.

4. Testing and Walkthrough We test every inlet to confirm the system is working properly. Then we show you how to use the hose, attachments, and power unit, including how to empty the canister.

Why Homeowners Choose Central Vacuums

• Easier to handle: you carry only a lightweight hose
• Debris goes elsewhere: dirt is drawn through the tubing to a remote collection unit
• Quieter in the room: with the motor installed away from living areas, it’s generally quieter than many portable vacuums
• Wide reach: inlets are placed to cover multiple rooms and floors
• Works for many projects: installation can be planned for new homes, renovations, or existing houses
• Hide-A-Hose: a retractable hose means no hose storage

Why Choose Custom Vacuum Systems

We’ve installed central vacuum systems across Long Island for more than 50 years. Every layout is designed around the individual home.

Our installation services cover:

• New construction
• Existing homes
• Renovations and additions
• Central vacuum retrofits
• Hide-A-Hose systems
• System upgrades

We work with homeowners, builders, and contractors to choose the right equipment and plan an installation that suits the property.

Frequently Asked Questions

Can a central vacuum be installed in my existing Commack home? In most cases, yes. We evaluate the home, find practical tubing routes, and recommend inlet and power unit locations that limit disruption to finished areas.

Does it matter whether my home is in Huntington or Smithtown? For the central vacuum design itself, no. If the installation is part of a permitted construction or renovation project, that project generally follows the requirements of the town your property is in.

Where is the power unit typically installed? Usually in a garage, basement, or utility room. The location should be accessible, have power available, and leave room to empty the canister.

What is Hide-A-Hose? It’s a retractable hose that’s stored inside the tubing, pulled out from the inlet for cleaning, and retracted afterward.

How many inlets will my home need? That depends on the home’s size, layout, number of levels, and hose length. We determine the number of inlets during planning.

How do you choose the power unit? We consider the size of the home, the total tubing length, and the number of inlets, then recommend a suitable unit.