Central Vacuum Installation in
Bay Shore, NY

Central Vacuum Systems Designed and Installed for New Homes, Renovations, and Retrofits

Custom Vacuum Systems installs central vacuum systems for homes in Bay Shore. Every system is planned around the house it goes into. We lay out the inlets, route the tubing, choose the power unit, and complete the installation, whether the home is still at the framing stage, in the middle of a remodel, or already finished and occupied.

Request an Installation Consultation

A Cleaner, Easier Way to Vacuum the Whole House

In a central vacuum system, the motor and dirt collection are part of the house instead of a machine you carry around. The power unit is mounted in one location, typically a garage, basement, or utility area. It connects through hidden tubing to inlets placed around the home. You plug a lightweight hose into any inlet and clean. The debris is carried through the walls to the collection unit rather than into a bag you push across the floor.

For more than 50 years, Custom Vacuum Systems has designed and installed central vacuum systems on Long Island. We work with homeowners who want to upgrade, and with builders and contractors who include a central vacuum as part of their projects.

Is Your Home a Good Fit for a Central Vacuum?

Most homes can accommodate a central vacuum. The main questions are practical ones:

• Is there a place for the power unit? A garage, basement, or utility space usually works, as long as there’s power nearby and room to empty the canister.
• Can tubing reach the main living areas? Basements, attics, and interior walls are common routes in finished homes.
• Is construction or remodeling underway? If so, installation is usually simpler because framing is exposed.

We answer these questions during a consultation and site visit, before recommending a system.

Installation for Every Type of Project

New Home Construction

Adding a central vacuum during construction gives you the most options. With the framing still open, we can run tubing along short, efficient routes, put inlets exactly where they’ll be most useful, and plan the power unit location with the rest of the home’s systems. We coordinate with builders and contractors so the rough-in fits into the construction schedule before the walls are insulated and closed.

Retrofitting a Finished Home

If you live in an existing home, a central vacuum is still within reach. Retrofit installations depend on careful routing. We use basements, attics, closets, and wall cavities to reach each area while limiting disruption to finished surfaces. After evaluating the house, we’ll recommend a layout that gives you good coverage without unnecessary work.

Remodels and Additions

If you’re renovating a kitchen, finishing a basement, or building an addition, you’re already opening walls and ceilings, which makes it an efficient time to install central vacuum tubing. If your renovation requires permits, those are generally handled through the Town of Islip, since Bay Shore is an unincorporated hamlet within the town. Contact us early in the project so the central vacuum can be designed around the new layout.

Planning Inlets, Tubing, and Power Unit Placement

Careful planning is what makes a central vacuum convenient to use every day. We look at:

• Inlet count: how many inlets your floor plan needs for full coverage with your chosen hose length
• Inlet locations: centrally positioned spots, often in hallways, where one inlet can serve several rooms
• Levels and stairways: coverage for every floor, including stairs and finished lower levels
• Tubing paths: routes that stay as short and direct as possible to maintain strong suction
• Power unit location: an accessible place with power available and enough clearance for maintenance

What We Install

Central Vacuum Systems

Complete systems configured for whole-home cleaning.

Power Units

The motor and collection unit that drive the system. We size the unit to your home by considering square footage, total tubing length, and number of inlets.

Hide-A-Hose Systems

A retractable hose that pulls out of the inlet when you clean and slides back into the tubing when you’re finished, so there’s no bulky hose to store.

Inlet Valves

Wall-mounted connection points installed at the locations set during planning.

Tubing & Piping

The concealed network connecting each inlet to the power unit.

Accessories & Cleaning Tools

Hoses, floor tools, attachments, and other components to round out the system.

From Consultation to Completed Installation

1. Talk Through Your Goals We start by learning about your home and how you’d like to use the system, including whether a retractable Hide-A-Hose is a good fit.

2. Evaluate and Plan We review the house, identify workable tubing routes, and set the inlet and power unit locations. Before installation begins, you’ll understand the plan.

3. Install the System Our team runs the tubing, installs the inlets, and mounts and connects the power unit according to the plan.

4. Test and Explain We test every inlet to confirm the system works as it should. Then we walk you through the hose, attachments, and routine care of the power unit.

Reasons to Choose a Central Vacuum

• Less to carry: you move a lightweight hose instead of a full vacuum
• Dust goes elsewhere: debris is pulled through the tubing to a collection unit outside the living space
• Quieter operation where you’re cleaning: the motor runs remotely, so it’s generally quieter in the room than many portable vacuums
• Wide reach: well-placed inlets cover multiple rooms and floors
• Options for any stage: installation can be planned for new construction, renovations, or finished homes
• Hide-A-Hose convenience: the retractable hose eliminates hose storage

Why Choose Custom Vacuum Systems

We’ve spent more than 50 years designing and installing central vacuum systems across Long Island. We plan each installation around the specific house instead of using a one-size-fits-all layout.

We handle installations for:

• New construction
• Existing homes
• Renovations and additions
• Central vacuum retrofits
• Hide-A-Hose systems
• System upgrades

Whether you’re a homeowner, builder, or contractor, we’ll help you choose the right equipment and plan an installation that suits the property.

Frequently Asked Questions

Can a central vacuum be installed in my existing Bay Shore home? In most cases, yes. We evaluate the home to find practical routes for the tubing, then recommend locations for the inlets and power unit that minimize disruption to finished areas.

What’s the best time to install a central vacuum? During new construction or a renovation, while the framing is still open. That gives you the most flexibility. Retrofits in finished homes are also common.

Where is the power unit usually installed? Usually in a garage, basement, or utility area. The best spot is accessible, has power nearby, and leaves room to empty the canister.

What is a Hide-A-Hose system? It’s a retractable hose system. The hose is stored inside the tubing and pulled out through the inlet when you need it.

How many inlets will I need? It depends on the size and layout of the home, the number of levels, and the length of the hose. We determine the count and locations during planning.

How do you choose the right power unit? We consider the home’s size, the total length of the tubing, and the number of inlets, then recommend a unit suited to the system.