Central Vacuum Installation in Amityville, NY

Custom-Designed Central Vacuum Systems for New Builds, Remodels, and Existing Homes

A central vacuum system is built into the house, so the results depend on how it’s planned. Custom Vacuum Systems designs and installs central vacuum systems for homes in Amityville. We map out tubing routes and inlet locations, choose the power unit, and complete the installation, whether the house is under construction, being remodeled, or already finished.

Book an Installation Consultation

What a Central Vacuum Adds to Your Home

With a central vacuum, you no longer need a portable machine with a motor, bag, and cord to carry up and down stairs. The system’s power unit is installed in one out-of-the-way place, such as a garage or utility room. Concealed tubing connects it to inlets in the walls throughout the house. When you want to clean, you connect a lightweight hose to an inlet and go. Everything you pick up travels through the tubing to the collection unit, away from the living space.

Custom Vacuum Systems has been providing central vacuum solutions on Long Island for more than 50 years. We work with homeowners, builders, and contractors, so we can plan a system on our own or as part of a larger construction project.

Installation Considerations for Amityville Properties

Amityville is on the Great South Bay in the Town of Babylon. Some of its waterfront areas are in FEMA-designated flood zones. For homes in these areas, the location of the power unit deserves extra thought. Garages and lower-level spaces are common spots for the unit, but in a flood-prone location it may make sense to mount it higher or put it elsewhere in the house. We’ll talk through the options during planning. Any work in a flood zone also has to meet the building requirements that apply to your property.

For homes outside those areas, the priorities are the ones we evaluate everywhere: the structure of the house, available routes for tubing, and where inlets will actually be convenient to use.

Choosing the Right Time to Install

During New Construction

If your home is still at the framing stage, you’re in the best position to add a central vacuum. With open walls, we can run tubing along direct paths and place inlets anywhere they make sense. We can also plan the power unit location alongside the electrical and mechanical work.

We coordinate with builders and general contractors so the rough-in happens at the right point in the schedule, before insulation and drywall.

In an Existing Home

Many finished homes can accept a central vacuum without major construction. A retrofit takes careful routing, using attics, basements or crawl spaces, closets, and interior wall cavities to reach the rooms you want to serve. We inspect the house first, then propose a layout that balances coverage with the least possible disturbance to finished walls and ceilings.

As Part of a Renovation

A remodel or addition often exposes framing that would normally be hidden. That makes it a practical time to run tubing, both for the new space and, where possible, for connections to the rest of the house. If you have a renovation planned, contact us before the walls are closed so the central vacuum can be included in the design.

Designing the Layout

A central vacuum is only as convenient as its inlet locations. Our planning covers:

• Coverage: determining how many inlets the house needs so every room is within reach of the hose
• Placement: putting inlets in hallways and central spots where one connection can serve several rooms
• Multiple levels: accounting for stairs, upper floors, and finished basements
• Efficient runs: keeping tubing paths short and direct to maintain suction
• Power unit siting: choosing a location that’s accessible for emptying the canister, has power available, and, where relevant, sits above likely flood levels

Equipment and Components

Complete Central Vacuum Systems

Whole-home systems configured for the size and layout of the property.

Power Units

The motor and dirt collection unit at the center of the system. We match it to the home’s square footage, the total length of the tubing, and the number of inlets, so you get enough performance without paying for capacity you won’t use.

Hide-A-Hose

A retractable hose system. The hose pulls out of the inlet when you need it and retracts back into the tubing when you’re done. There’s no separate hose to coil up or find storage space for.

Wall Inlets

The connection points for your hose, installed in the locations set during planning.

Tubing

The piping network inside the walls, floors, and ceilings that carries debris from each inlet to the power unit.

Hoses and Cleaning Tools

Attachments, floor tools, hoses, and accessories to complete your system.

Our Installation Process, Step by Step

Step 1: Initial Consultation We talk about your home, your cleaning habits, and the features you’re interested in, such as a retractable Hide-A-Hose setup.

Step 2: Home Assessment and Layout We look at the structure, identify possible tubing routes, and choose locations for the inlets and power unit. You’ll know what the plan involves before any work begins.

Step 3: Installation Our team installs the tubing, inlets, and power unit according to the approved layout.

Step 4: System Check and Walkthrough We test each inlet to confirm proper operation. Then we show you how to use the hose, attachments, and power unit, including how to empty the collection canister.

Advantages of a Central Vacuum

• Nothing heavy to carry: the motor stays put, and you only carry the hose
• Cleaner indoor air while you vacuum: debris is sent through the tubing to a separate collection unit
• Less noise where you’re cleaning: with the motor in a remote location, operation is generally quieter than many portable vacuums
• Room-to-room reach: strategically placed inlets cover large areas and multiple floors
• Flexible installation: systems can be planned for new builds, renovations, or finished homes
• No hose storage with Hide-A-Hose: the hose retracts into the wall when not in use

Why Custom Vacuum Systems

With more than 50 years of experience installing central vacuum systems across Long Island, we know that no two houses call for the same layout. We tailor every system to how the house is built and how you plan to use it.

Our installation work includes:

• New construction
• Existing homes
• Renovations and additions
• Retrofit installations
• Hide-A-Hose retractable systems
• System upgrades

We work with homeowners, builders, and contractors to select the right equipment and design a layout that fits the property.

Frequently Asked Questions

Can you add a central vacuum to a finished home in Amityville? In many cases, yes. We assess the house to find practical routes for the tubing and good locations for the inlets and power unit, then recommend a layout that minimizes disruption.

Where should the power unit go if my home is in a flood zone? It depends on the property. For homes in flood-prone areas, we’ll discuss mounting the unit at a higher point or placing it elsewhere in the house, in line with the building requirements that apply to your home.

Is it better to install during construction or a remodel? If you have the choice, yes. Open framing gives you the most flexibility for tubing routes and inlet placement. Contact us before the walls are finished.

How does Hide-A-Hose work? The hose is stored inside the system’s tubing. You pull out as much as you need from the inlet, and it retracts back into the wall afterward.

How many inlets does a typical home need? There isn’t a single number that fits every home. It depends on the floor plan, the number of levels, and the hose length. We determine the inlet count during planning so the system reaches the areas you want to clean.

Which power unit should I choose? The right unit depends on the size of the home, the length of the tubing, and the number of inlets. We’ll recommend one that fits your system.