Central Vacuum Installation in East Setauket, NY

Carefully Planned Central Vacuum Systems for New Homes, Remodels, and Retrofits

Custom Vacuum Systems designs and installs central vacuum systems for homes in East Setauket. We plan every installation around the house it serves. That means choosing inlet locations, laying out tubing routes, and matching the power unit to the system before installation begins. We take on new construction, renovations, and retrofits in finished homes.

Request an Installation Consultation

The Case for a Central Vacuum

A central vacuum separates vacuuming from the heavy equipment that usually comes with it. The power unit, which includes the motor and collection canister, is installed in a garage, basement, or utility space. Tubing runs inside the walls, floors, or ceilings to inlets placed throughout the home. You connect a lightweight hose to an inlet, and the debris is pulled through the tubing to the canister instead of collecting in a machine at your side.

Custom Vacuum Systems has more than 50 years of experience designing and installing central vacuum systems throughout Long Island. We work with homeowners, and we coordinate with builders and contractors on construction and remodeling projects.

Project Planning in East Setauket

East Setauket is an unincorporated hamlet in the Town of Brookhaven, so construction and renovation permits are generally handled by the town. When a central vacuum is part of a permitted project, we coordinate with your builder or contractor so the tubing and inlets go in while the framing is still open.

If your property is in a FEMA-designated flood zone, we’ll take that into account when choosing the power unit location and keep the equipment above likely flood levels where the property’s requirements call for it.

Types of Installations

New Construction

Starting during construction gives a central vacuum the most flexibility. With the framing exposed, tubing can follow direct paths, inlets can go exactly where they’ll be most convenient, and the power unit location can be planned with the home’s other systems. We coordinate the rough-in with your builder so it’s completed before insulation and drywall.

Existing Homes

Finished homes are frequently retrofitted with central vacuums. We look for tubing routes through basements, attics, closets, and wall cavities that reach your main living spaces while keeping disruption to finished surfaces to a minimum. After evaluating the house, we recommend a layout that works with its structure.

Renovations and Additions

If you’re opening walls for a kitchen renovation, basement finishing project, or addition, it’s a good time to install tubing. Contact us before the walls are closed so the inlets and tubing can be designed around the new floor plan.

Building the Right Layout

Thoughtful planning makes the system easy to use. When we design your layout, we consider:

• Number of inlets: based on the floor plan, number of levels, and hose length
• Inlet positions: central spots, such as hallways, that let a single inlet serve several rooms
• Coverage on every floor: stairs, upper levels, and finished basements included
• Tubing design: direct routes that help maintain suction
• Power unit placement: accessible, with power available, room to empty the canister, and appropriate height on flood-prone properties

Equipment We Install

Central Vacuum Systems

Complete whole-home systems configured for the property.

Power Units

The motor and collection unit that drives the system. We choose it based on the home’s square footage, total tubing length, and number of inlets.

Hide-A-Hose Systems

A retractable hose stored inside the tubing. It pulls out from the inlet when you need it and retracts into the wall when you’re done, so there’s no hose to carry or store.

Inlet Valves

Wall inlets installed at the planned locations.

Tubing and Piping

The concealed network connecting every inlet to the power unit.

Accessories and Cleaning Tools

Hoses, floor tools, attachments, and other components to complete the system.

Our Process

1. Consultation We discuss your home, how you clean, and the features you want, including Hide-A-Hose.

2. Evaluation and Planning We assess the structure, map tubing routes, and set the inlet and power unit locations. You’ll see the plan before work begins.

3. Installation Our team installs the tubing, inlets, and power unit according to the plan.

4. Testing and Walkthrough We test each inlet to confirm the system is working properly. Then we show you how to use the hose, attachments, and power unit, including how to empty the canister.

Benefits of a Central Vacuum

• Easy to maneuver: you carry a lightweight hose instead of a full vacuum
• Debris goes elsewhere: dirt travels through the tubing to a remote collection unit
• Quieter in the room: with the motor installed away from living areas, it’s generally quieter than many portable vacuums
• Whole-home reach: inlets are placed to cover multiple rooms and floors
• Options for any project: installation can be planned for new builds, renovations, or existing homes
• Hide-A-Hose: the retractable hose stays stored in the wall

Why Choose Custom Vacuum Systems

We’ve designed and installed central vacuum systems across Long Island for more than 50 years. Every installation is planned around the specific house rather than a standard template.

Our installation services include:

• New construction
• Existing homes
• Renovations and additions
• Central vacuum retrofits
• Hide-A-Hose systems
• System upgrades

We work with homeowners, builders, and contractors to select the right equipment and plan an installation suited to the property.

Frequently Asked Questions

Can you install a central vacuum in an existing East Setauket home? In most cases, yes. We evaluate the house, identify practical tubing routes, and recommend inlet and power unit locations that limit disruption to finished areas.

What if my home is in a flood zone? We’ll consider power unit locations that keep the equipment above likely flood levels, in line with the requirements for your property.

Where is the power unit usually installed? Typically in a garage, basement, or utility room. The spot should be accessible, have power available, and leave room to empty the canister.

What is Hide-A-Hose? It’s a retractable hose that’s stored inside the tubing, pulled out from the inlet for cleaning, and retracted afterward.

How many inlets will my home need? That depends on the home’s size, layout, number of levels, and hose length. We determine the number of inlets during planning.

How do you choose the power unit? We consider the home’s size, the total tubing length, and the number of inlets, then recommend an appropriate unit.